A
-
Afshari, Asghar
Large eddy simulation of propane combustion in a planar trapped vortex combustor [Volume 8, Issue 2, 2020, Pages 127-141]
-
Ahadinejad, Mohammad
Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
-
Ahmadi, Pouria
The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
-
Ahmadi Boyaghchi, Fateme
Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
-
A. Shirazi, Farzad
Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
-
AyatollahzadehShirazi, Farzad
Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
B
-
Bagheri, Iraj
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer [Volume 8, Issue 4, 2020, Pages 401-425]
-
Bahrami Ziabari, Nima
Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
-
Bashirpour, Mohammad
Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
-
Bozorgi, Alireza
Determination of significant sources generating low-frequency noise in horizontal axis wind turbines [Volume 8, Issue 3, 2020, Pages 253-262]
E
-
Ebrahimi, Majid
Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
F
-
Farzan, Hadi
Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
G
-
Gandjalikhan Nassab, S.Abdolreza
Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
-
Ghandehariun, Samane
Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
-
Gharali, Kobra
Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
-
Ghasemkhani, Amir
The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
-
Ghasemzadeh, Kamran
Simulation and economic evaluation of heat and power generation from flare gases in a combined cycle power plant [Volume 8, Issue 4, 2020, Pages 307-322]
-
Ghazi, Mehrangiz
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer [Volume 8, Issue 4, 2020, Pages 401-425]
-
Ghazizade-Ahsaee, Hossein
The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
-
Gholamian, Ehsan
The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
-
Ghorbani, Babak
Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
-
Ghorbaniasl, Ghader
Determination of significant sources generating low-frequency noise in horizontal axis wind turbines [Volume 8, Issue 3, 2020, Pages 253-262]
-
Goharkhah, Mohammad
Thermal conductivity calculation of magnetite using molecular dynamics simulation [Volume 8, Issue 1, 2020, Pages 45-54]
H
-
Habibi, Soroush
Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
-
Hajabdollahi, Hassan
Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
-
Hanafizadeh, Pedram
The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
-
Heydari, Ehsan
Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
-
Hosseini, Zahra
Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
-
Hosseini Baghdad Abadi, Seyyed Mehdi
Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
J
-
Jafari, Mostafa
Simulation and economic evaluation of heat and power generation from flare gases in a combined cycle power plant [Volume 8, Issue 4, 2020, Pages 307-322]
-
Jalali, Alireza
A numerical study of the effect of channel spacers on the performance of cross-flow forward osmosis membrane modules [Volume 8, Issue 3, 2020, Pages 237-251]
-
Jedari Ghourichaei, Masoud
Thermal conductivity calculation of magnetite using molecular dynamics simulation [Volume 8, Issue 1, 2020, Pages 45-54]
K
-
Karimi, Delara
Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
-
Khanmohammadi, Shoaib
Thermodynamic assessment and proposal of new configurations of an indirect water bath heater for a City Gate Station (a case study) [Volume 8, Issue 4, 2020, Pages 349-365]
-
Kolahdouz, Mohammadreza
Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
-
Kosari, Erfan
Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
M
-
Mazzarella, Livio
The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
-
Mehran, Saeed
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer [Volume 8, Issue 4, 2020, Pages 401-425]
-
Mirhosseini, Mojtaba
Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
-
Moein Addini, Maryam
Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
-
Mohammadi, Arman
Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
-
Momen, Mahyar
Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
-
Mostafavi Sani, Mostafa
Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
N
-
Namjo, Amin
The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
-
Nayyeri, Pooyan
Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
-
Nazer, Sahar
Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
-
Nikian, Mohammad
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer [Volume 8, Issue 4, 2020, Pages 401-425]
-
Niknafs, Naeem
A numerical study of the effect of channel spacers on the performance of cross-flow forward osmosis membrane modules [Volume 8, Issue 3, 2020, Pages 237-251]
-
Noorpoor, Alireza
Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
P
-
Pagodaripour, Ali
The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
-
Poursafar, Jafar
Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
R
-
Rajabi Zargarabadi, Mehran
Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
-
Rastegardoost, Mohammad Mahdi
Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
-
Razavi, Mohsen
Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
-
Razi Astaraei, Fatemeh
Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
-
Razmara, Naiyer
Thermal conductivity calculation of magnetite using molecular dynamics simulation [Volume 8, Issue 1, 2020, Pages 45-54]
-
Rezaie, Behnaz
The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
-
Rosen, Marc. A.
The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
S
-
Sajadi, Ahmadreza
Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
-
Sajadi, Behrang
Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
-
Sarrafzadeh, Mohammad-Hosein
Simulation and economic evaluation of heat and power generation from flare gases in a combined cycle power plant [Volume 8, Issue 4, 2020, Pages 307-322]
-
Seyyedmahmoodi, Mohammad
Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
-
Shafie-Pour Motlagh, Majid
Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
-
Shahbazi, Bagher
Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
-
Shahgholian, Ghazanfar
Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
-
Shahsavar, Amin
Thermodynamic assessment and proposal of new configurations of an indirect water bath heater for a City Gate Station (a case study) [Volume 8, Issue 4, 2020, Pages 349-365]
-
Sharifzadeh, Reza
Large eddy simulation of propane combustion in a planar trapped vortex combustor [Volume 8, Issue 2, 2020, Pages 127-141]
T
-
Tahani, Mojtaba
Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
-
Talati, Faramarz
Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
-
Talebi, Sasan
Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
Y
-
Yari, Mortaza
Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
-
Yousefnejad, Roozbeh
Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
Z
-
Zakerzadeh, Mohammad Reza
Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
-
Zareiforoush, Hemad
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer [Volume 8, Issue 4, 2020, Pages 401-425]
-
Zirak, Saadat
Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
Your query does not match with any item